I recently had the opportunity to rebind a set of newsletter from a defunct political party in Singapore. The Barisan Socialis was formed in 1961, and was led by Dr Lee Siew Chor until 1988 when it merged with Workers’ Party. More information can be obtained from Wikipedia if you are interested.
I will not delve much into the party’s history as I would like to focus on the rebinding of the set of newsletters. It contained 100 issues of the party’s newsletter spanning from 1961 to 1964. The newsletters were bound in four sets of soft Kraft paper covers and secured with three metal staples along margins of its long edge. As expected, the staples rusted over the years and the metal oxide deposits had caused the surrounding paper to be stained with a ring of orange rust. The punctured areas had also became friable and in some newsletters, the holes were enlarged and no longer held by the metal staples.
Other defects included frayed edges along the fore edge of the bound volumes and damaged book spines. Cellophane tape was also used to hold the volumes together and these had become stiff and stained over the years.
The first step in rebinding the volumes involved removing all the metal staples and cutting away the damaged spines, leaving loose sheets consisting of individual newsletters and original volume covers. Cellophone tapes were then removed carefully, particularly in areas where tape was used to patch long tears, in order to prevent further damage to the pages. These were then backed with a thin almost translucent Kozo paper. Thankfully there were few tears and the tears appeared on volumes which were printed single sided using silkscreen.
Volumes were then bounded with new cards with colours complementary to the original covers. The two new cards, one on either ends, serve as end papers to the new book block. The entire stack was then bored through using a fine 0.5mm drill bit. The new holes were made about 1cm adjacent to the original staple holes. Reusing the previously stapled holes was not an option as the surrounding paper had became friable due to the rusting.
The newsletters were then stitched up in Japanese Stab Binding style. The perforations followed the original positions of the staples in the new exposed binding along the long edge. Two styles were adopted. First, the binding was left exposed on the end papers. Second, the stab binding was covered by end papers.
A new buckram hard cover was then attached to the completed book block. Similar to the end papers, colours of the buckram was chosen to complement the end papers and the original soft covers. To differentiate between the four volumes, an embossed pattern was made on each of the covers. The pattern consist of the defunct party emblem and the sequence number of each volume from 1 to 4. All these embossed patterns were drawn and cut by hand.
After each of the four book blocks were cased in, they were left in the nipping press overnight to ensure that the end papers have been firmly attached to the covers.
It had been a hectic March for me with the two bookbinding workshops and other work activities. It did affect the progress of rebinding this set of rare newsletters. Nonetheless I am glad it is completed and the four volumes will hopefully be kept in good reading condition for a long while more.